сайт http://classicnerd.net/
Инструкция по установке:
OK guys here is a comprehensive, step-by-step to installing this beautiful OS done by these beautiful devs on to your Touchpad:
Before we get started you will need the following files:
-ACMEinstaller (1 not 2)
-ACMEuninstaller
-update-cwm_tenderloin-1012.zip
-moboot_0.3.5.zip
-Classic-va0.0.1-tenderloin.zip
-gapps_ics_4.0.3_v8.zip
If you have any previous version of Android then you will need to remove it by doing the following:
1. Place the ACMEuninstaller file AND ACMEinstaller file inside your Palm, Inc folder on your PC. (C:\Program Files\Palm, Inc)
2. Now, on your Touchpad in the "just type" box on webos home screen enter "webos20090606" and turn on Developer Mode.
3. Now, you must put your TP in USB mode by going into Settings>Device Info>Reset Options>Restart.
4. When the screen goes black immediatley HOLD DOWN the Vol UP until there is a big USB symbol on the screen.
5. When you see the USB symbol make sure that your device is connected to the PC via USB.
6. Now, open up the Command Prompt on your PC by going to Start>Run> type in "cmd" in the field.
7. In the Command Promt, change your directory to the Palm, inc directory by typing "cd C:\Program Files\Palm, inc" (without quotes).
8. Once you are in the right directory type in "novacom boot mem:// < ACMEuninstaller" and hit enter
9. Wait while android is uninstalled and the TP restarts into webos.
10. Now, connect your TP to the PC and enable USB drive mode. Create a "cminstall" folder on the root of the TouchPad and place the moboot and clockworkmod files in it and exit usb mode.
11. Repeat steps 3-8 again to install Moboot and CWM, ONLY THIS TIME IN STEP 8 YOU TYPE "novacom boot mem:// < ACMEinstaller"
12. Sit back and wait for everything to install. When the TP reboots, it will reboot into moboot where you can now select Clockworkmod.
13. Using the Vol - button, select clockworkmod and press the home button.
14. Once in Clockworkmod, WIPE, WIPE, WIPE, and WIPE some more! This means go down to "Wipe Cache Partition" and select it to wipe the cache. When that's finished, go down to "advanced" and select it. In there you will select "Wipe Dalvik Cache". Once that is done, go back to the main menu in clockworkmod and select "wipe data/factory reset" and select that and let it finish. REPEAT THIS AGAIN!
15. Now, once you have done all of this, it is finally time for the fun part, Installing ClassicNerd ICS!
16. While still in Clockworkmod, scroll down to "mounts and storage" and then scroll all the way to the bottom where it says "mount USB storage" and select it. You are now in USB mode. (MAKE SURE YOUR YOUR TOUCHPAD IS CONNECTED TO YOUR PC!!! ARGHHHH!!!)
17. Now, place the Classic-va0.0.1-tenderloin.zip and gapps_ics_4.0.3_v8.zip on to the root of your SD card on the Touchpad.
18. Unmount the TP from USB mode on clockworkmod by selecting "unmount".
19. Now go all the way back to the main menu in clockworkmod and then scroll down to "install zip from sdcard".
20. Now choose "choose zip from sdcard" and scroll down to the classicnerd ics rom and select it. Confirm the install and wait until it finishes.
21. When that's finished repeat steps 19 and 20 only this time you will select the gapps_ics_4.0.3_v8.zip to install. Do that and wait for it to finish.
22. Disconnect all wiring from the TP and reboot. You will now see the option for ICS in the moboot screen. Select it.
23. Enjoy Ice Cream Sandwich!
качать здесь: http://classicnerd.net/betas/
потестить не смог (отсутствует пока планшет)