webOS Forums - форум пользователей телевизоров на webOS

[JackSparrow]

В дополнение к вышесказанному:
Повез в сервис свой 60um7100. Там сразу с порога: "это матрица". Поехал в другой, тоже отказали.
В итоге проблема была с резистором на материнке. (Нашел мастера по объявлению)

Ну вот как так можно?? Квалификация мастеров хромает или денег сразу много хотят?

[maxaon]

Разговаривал в одном из сервис центров с "мастером", говорит: "заказываем плату, ставим, не работает возвращаем как не подходящую деталь. И т. п. "
А копаться и искать какая там причина, деталька никто не хочет (не может).

[JackSparrow]

Статусы включения и выключения для телевизоров на webOS 22 и младше,
а также для некоторых ТВ на webOS 23

Если с телевизором возникла проблема, например, он сам по себе выключается, то информация из меню Power On/Off Status, находящегося в сервисном меню, может помочь понять причину. Здесь можно увидеть последние 126 причин, по которым телевизор включался или выключался.
Просьба не размещать данный материал на других ресурсах.

Состояние истории выключений	Описание	Строка	Шестнадцатеричное значение	Новое?
OFF_BY_1SEC_POWER_OFF	similar with POWER_OFF_BY_KEYTIMEOUT, but different concept. RESULT. Micom force to trigger within 4 seconds. CONDITION: When TV Power on/off, CPU doesn’t response within 4 seconds, and then pressing powerkey	1secPowerOFF	0x08
OFF_BY_20V_DETECT	Not used (Used in older OLED, monitoring 20VTto T-CON)	20V Detect Failure	0x55
OFF_BY_5VMNT	Power off by unstable AC power detect. RESULT: Micom check the stable power. CONDITION: When AC on cr DC on, stabilization check routine (Power Detect High Check), fail after multi Power on	5V Failure	0x05
OFF_BY_ABN	Power off when casel and case2 sequence. Case1: Pipe line overflow (Booting fail). Case2: Resume fail from suspend mode when QSM+	Abnormal	0x01
OFF_BY_ACDET	Power off by not detecting AC (abnormal case). RESULT: Micom triggers TV Power off. CONDITION: Power detect port drops to low while Power on status	AC Failure	0x03
OFF_BY_ALWAYSON	(Rollable OLED) When alwayson mode time is ended, it will save this reason	Always On	0x80	NEW
OFF_BY_ARTISTIC_DISPLAY	Power off when no input for 3 hours in artistic screen (NMRM only)	Artistic Display	0xB2	NEW
OFF_BY_AOD_30SEC	Power off after 30 seconds n AOD app black state	webOS 22		NEW
OFF_BY_AUTO_OFF_AOD_TIMER	Automatically power off after 1 hour in the AOD app	webOS 22		NEW
OFF_BY_AUTO_OFF	Power off by auto off function 1. When it lasts for 15 minutes that no signal and no remote key input. 2. When screen mute status lasts for 2 hours	Auto Off	0x16
OFF_BY_BATTERY_THERMAL_PROTECT	Power off when the battery temperature exceeds the spec range (NMRM only)	Over Batter/Temperature	0xB0	NEW
OFF_BY_BDP_ERROR	Power off by BDP error (OLED only)	INV Error	0x1E
OFF_BY_BDP_ERROR1	Power off by BDP error (OLED only)	BDP Error!	0xA0
OFF_BY_BDP_ERR0R2	Power off by BDP error (OLED only)	BDP Error2	0xA1
OFF_BY_BDP_ERROR3	Power off by BDP error (OLED only)	BDP Error3	0xA2
OFF_BY_BDP_ERROR4	Power off by BDP error (OLED only)	BDP Error4	0xA3
OFF_BY_BDP_ERROR5	Power off by BDP error (OLED only)	BDP Error5	0xA4
OFF_BY_BDP_ERROR6	Power off by BDP error (OLED only)	BDP Error6	0xA5
OFF_BY_BDP_ERROR7	Power off by BDP error (OLED only)	BDP Error7	0xA6
OFF_BY_BDP_ERROR8	Power off by BDP error (OLED only)	BDP Error8	0xA7
OFF_BY_BDP_ERROR9	Power off by BDP error (OLED only)	BDP Errors	0xA8
OFF_BY_BDP_ERROR10	Power off by BDP error (OLED only)	BDP Error10	0xA9
OFF_BY_BDP_ERROR11	Power off by BDP error (OLED only)	BDP Error11	0xAA
OFF_BY_CIPLUS_SEARCH_END	CI+ search complete (Log)	CIPIus Search End	0x54
OFF_BY_COLD_TIMEOUT	After reboot, client timeout occurs again during re-entering always ready or suspend. After that force power off (Prevent infinite reboots)	webOS 22		NEW
OFF_BY_COMP_END	RESULT: Power off CONDITION: OLED threshold voltage degradation completes	Compensation End	0x56
OFF_BY_CPU_ABNORMAL	Power off by CPU Abnormal status. 1. Power off (Last Cold, Lest Cool, Last Warm). CONDITION: When Power on and checking Power on Mode, abnormality appears. 2. Power off in CPU Abnormal Case (Exception). - Release Mode: Reboot - Debug/Event Mode: Power off	CPU Abnormal	0x1D
OFF_BY_CPUCMD	Power off by main SoC command	CPU Command	0x00
OFF_BY_DATA_FLASH	Not used	Data Flash	0x46
OFF_BY_DIAL	Power off by dial	Dial	0x89
OFF_BY_DPM	For StandbyME Models only, when the TV turns off because it is turned on by HDMI CLK recognition, but there is no Good Video	webOS 22		NEW
OFF_BY_EDID_WRITE	Power off by EDID write done	EDID Write	0x69
OFF_BY_EWBS	Power off by EWBS function (Disaster Broadcast)	EWBS	0x68
OFF_BY_FAN_CONTROL	Not used	Fan Control	0x44
OFF_BY_FAN_CTRL_ERROR	Power off by fan control error (for OLED/STB model/HECTO)	Fan Ctrl Error	0x5D
OFF_BY_FRC_THERMAL_ PROTECT	Not used	FRC Thermal Protection	0x8E
OFF_BY_HDMI_CEC	Power off by HDMI CEC command	HDMI CEC	0x62
OFF_BY_HDMIUPDATE	Power off by HDMI switch update	HDMI Update	0x6F
OFF_BY_HOMEKIT	(Rollable OLED) Power or by smart phone application	HOMEKIT	0x83	NEW
OFF_BY_INSTOP_KEY	Power off by Instop Key	IN_STOP	0x15
OFF_BY_IOT_MACRO	Power off by IOT device	IOT Macro	0x8A
OFF_BY_KEYTIMEOUT	Power off when TV is not turned off during a certain time. RESULT: Micom force to trigger TV Power off. CONDITION: When pressing powerkey while Power on/off status, CPU does not response within 8 seconds or call the WDT timer API	Key Time Out	0x02
OFF_BY_LACK_OF_BATTERY	Power off when the batter capacity is less than 1 % (NMRM only)	Lack of Battery	0xB1	NEW
OFF_BY_LLS_RECOVERY	Power off LLS recovery	LLS Recovery Off	0xBC	NEW
OFF_BY_LLS_UPDATE	Power off LLS update	LLS Update Off	0xBD	NEW
OFF_BY_LOCAL_KEY	Power off by local key	Local Key	0x1C
OFF_BY_LOCKCHECK_FAIL	Power off when Vxl lock check fail in defective product judgment scenario	Lock Check Fail	0x8C	NEW
OFF_BY_MAIN_WDT	Not used	Watchdog	0x42
OFF_BY_MICOM_UPDATE	Power off by Micom update	Micom Update	0x67
OFF_BY_NO_POLLING	Power off when receiving no ack (Acknowledge) Debug Status: Release Mode RESULT: TV Power off/on (Reboot) CONDITION: There is no I2C response from CPU for 15 seconds. ==> if warm standby, Power off occurs	No Polling	0x06
OFF_BY_NO_MOTION	(Rollable OLED) Power off when motion is not detected, by motion sensor	No Motion Auto Off	0x82	NEW
OFF_BY_NOSIGNAL	Power off by TV is on without an input signal	No signal	0x84
OFF_BY_NO_SIGNAL_DPM	For StandbyME Models only, power off by No Signal in HDMI status	webOS 22		NEW
OFF_BY_OLED_AM_MODE	If the module cable is disconnected in OLED W series model, the Micom is force Power off TV	OLED Am Mode	0x6B
OFF_BY_OFF_TIMER	Power off by Off timer	Off Timer	0x11
OFF_BY_ON_TIMER	Power off by On timer. Power off when no remote and kcal key input for 2 hours after Power on by On timer	On Timer	0x17
OFF_BY_ON_RF_FAIL	RESULT: Reboot CONDITION: OLED module compensation is running but fails	Compensation Fail	0x58
OFF_BY_ONRFDONE_ERROR	Power off when on RF Done Error in defective product judgment scenario	On RF Done Error	0x88
OFF_BY_OSLB_SAVING	OSLB is name of the residual image compensation algorithm applied from’22. Was called JB until 21. - OSLB: Analyze the characteristics of the displayed image to calculate the accumulated usage of OLED devices and determine the compensation value	Since webOS 6.0		NEW
OFF_BY_OTA	Power off by OTA update	OTA	0x1F
OFF_BY_OVERHEATING	(OLED) Power off by overheating	Overheating	0x5F
OFF_BY_PNWASHSTART	(OLED) Power off for starting OLED panel noise function in warm state. Pixel Refresh	PNWash Start	0x66
OFF_BY_PNWASHDONE	(OLED) Power off by panel noise wash function compiled, after RS Completed	PNWash Done Off	0x63
OFF_RY_PNWASHFAIL	(OLED) Power off by panel noise wash function fail case (Not for webOS 22)	PNWash Fail Off	0x64
OFF_BY_COOLING	(OLED) Power off for cool down the OLED T-CON (JB Compensation) (Not for webOS 22)	Cooling Off	0x65
OFF_BY_POWER_BD_ PROTECT	Not used	Power Protect	0x07
OFF_BY_POWERONLY	Request reset by p-only remote key (condition: DC On)	Power Only	0x61
OFF_BY_POWERSOUND	Power off by Power off sound function	Power Sound	0x6D
OFF_BY_QUICK_START	Power off by reboot to suspend function. When the user turns off the TV, reboot the TV with QSM+ as needed	Quick Start	0x5A
OFF_BY_QUICK_START	When a reboot action is required in a specific scenario (Alter update, config change, broadcasting channel related, etc...)	webOS 22		NEW
OFF_BY_REBOOT_ARREGULAR	Reboot every 6 hours to stabilize the system in Always Ready state	webOS 22		NEW
OFF_BY_REBOOT_FAULT	Reboot when dc off after fault occurrence for fault recovery	webOS 22		NEW
OFF_BY_REBOOT_ONREGULAR	After using the TV for a long time (standard: 12h, advanced: 24h), when DC off, wait for 1 minute in warm for system stability and then reboot	webOS 22		NEW
OFF_BY_REBOOT_TIMEOUT	Reboot when client timeout occurs when entering suspend or always ready	webOS 22		NEW
OFF_BY_REMOTE_KEY	Power off by remote key	Remote Key	0x10
OFF_BY_REQUEST_RESET	Power off by request reset. CONDITION 1: Run 'Initialization' through Smart TV setting. CONDITION 2: Run 'App initialization. CONDITION 3: Reset is required for In-Start setting is changed	Micom Reset	0x40
OFF_BY_RESET	Power off by Micom Reset. It's not recommend. Please use POWER_OFF_BY_REQUEST_RESET. RESULT: Reset the TV and initializes time data	Reset	0x04
OFF_BY_RESUME_FAIL	Power off by resume fail when de on case. If occur the resume fail, TV will be rebooted	Resume Fail	0x6C
OFF_BY_ROLL_ABNORMAL	(Rollable OLED) Power off by roll function abnormal	Roll Abnormal	0x8B	NEW
OFF_BY_RS232C	Power off by RS232C command	RS232c	0x18
OFF_BY_SIGNAL_DETECT	Not used	Sig Detect	0x45
OFF_BY_SLEEP_TIMER	Power off by sleep timer	Sleep Timer	0x12
OFF_BY_SoC_THERMAL_PROTECT	Not used	SoC Thermal Protection	0x8D
OFF_BY_SWDOWN	Power off by software download	SW Download	0x1B
OFF_BY_TCON_FAIL	Power off when T-CON fail in defective product judgment scenario	T-CON Check Fail	0x87
OFF_BY_TEMPE RATURE_SENSOR_ERROR	(OLED & HECTO) Power off by temperature sensor error	Temperature Sensor Error	0x5E
OFF_BY_TOT	Power off by TOT (Time of table) function	TOT Timer End	0x6E
OFF_BY_TS_END	Not used	TS End	0x13
OFF_BY_VERIFY_FAIL	Not used	Verification Fail	0x43
OFF_BY_WARMCHECK	Power off by warm check thread. It's normal case. When D2 on with warm condition, main SoC run the warm check thread. If the SoC has nothing to do, TV is Power off by warmcheck	Warm Check Off	0x60
OFF_BY_WARMWAIT	When staying for a long time in active standby, after 4 hours, after confirming reservation and broadcasting service, force poweroff	webOS 22		NEW
OFF_BY_WEAVE	Power off by IOT device	Weave	0x6A
OFF_BY_WOV_TIMEOUT	If do not say TV On after being turned on by Hi LG (WOV), it will save this reason	PowerOff By WOV	0x85
OFF_BY_WOV_VOICE	If say "Hi LG" and say "turn off TV", it will save this reason	Voice	0x86
ON_BY_ACTIVE_DPM	For StandbyME Models only, when the TV is turned on with Good Video recognition in "DPM mode On" condition. (Active Standby -> Active)	webOS 22		NEW
ON_BY_ALWAYSON	(Rollable OLED) Power on by always-on function	Always On	0x7A	NEW
ON_BY_AMAZON	Power on by amazon hotkey	Amazon	0x77
ON_BY_AOD_BT	Power on when BT is connected in Always Ready state	webOS 22		NEW
ON_BY_AOD_NOTI	Power on when iot notification is recognized in Always Ready state	webOS 22		NEW
ON_BY_AOD_OK_KEY	Power on AOD state by OK key in Always Ready state	webOS 22		NEW
ON_BY_AOD_ON_TIMER	Power on AOD start by timer in Always Ready state	webOS 22		NEW
ON_BY_AOD_VOICE	Power on by voice recognition in Always Ready state	webOS 22		NEW
ON_BY_AOD_VOICE_WOV	Power on by far field voice recognition in Always Ready state	webOS 22		NEW
ON_BY_FPTPLAY	Power on by FPT Play CP hot key	Auto Reboot	0x7F
ON_BY_CAM_ONOFF	Not used	CAM	0x38
ON_BY_COMPENSATION_FAIL	(OLED) Cancel the OLED compensation for user DC on (Not for webOS 22)	Compensation Fail	0x3D
ON_BY_COOLINGDONE	When completed the cooing action (T-CON cooling), TV will be DC on with warm condition (Not for webOS 22)	Cooling Done On	0x71
ON_BY_CPU_ABNORMAL	Power off by CPU checking abnormal behavior. 1. Power off (Last Cold, Last Cool, Last Warm). CONDITION: When Power on and checking Power on Mode, abnormality appears. 2. Power off in CPU Abnormal Case (Exception). (Release Mode: Reboot DEBUG, Event Mode: Power off)	CPU Abnormal	0x2D
ON_BY_DISNEY_PLUS	Power on by Disney plus hot key	Disney+	0x98	NEW
ON_BY_EMMTIMER	Not used	EMM Timer	0x35
ON_BY_EWBS	When detect the EWBS signal, TV is auto turn on by EWBS (in warm condition)	EWBS	0x72
ON_BY_EWBS_OK	Power on by EWBS alert function (hot condition)	EWBSOk	0x75
ON_BY_GLOBOPLAY	Power on by GLOBO Play hotkey	Globoplay	0x9B	NEW
ON_BY_HDMI_CEC	Power on by HDMI CEC message "image view on" and "text view on" (KT Giga Genie_AI Speaker)	HDMI CEC	0x2F
ON_BY_HOMING	Not used	Homing	0x2E
ON_BY_HOTSTAR	Power on by hotstar hot key	Hotstar	0xC1	NEW
ON_BY_KINOPOISK	Power on by kinopoisk het key	kinoposk	0x9E	NEW
ON_BY_LAST_COLD	Not used	lastCold	0x28
ON_BY_LAST_COOL	Not used	lastCool	0x29
ON_BY_LAST_POWERON	String for from HOT status to Power on automatically (In general, with Power Cn status. AC off/on happens.)	lastPowerOn	0x2B
ON_BY_LAST_SUSPEND	Power on by suspend mode	lastSuspend	0x3A
ON_BY_LAST_WARM	When AC on after 1st in-stop, TV auto turn on warm state (after webOS3.5)	lastWarm	0x2A
ON_BY_LG_CHANNELS	Power on by LG Channels hot key	Igchannels	0x99	NEW
ON_BY_LLS_RECOVERY	Power on By LLS recovery	LLS Recovery On	0x94	NEW
ON_BY_LLS_UPDATE	Power on By LLS update	LLS Update On	0x95	NEW
ON_BY_LOCAL_KEY	Power on by local key function	locaKey	0x22
ON_BY_Micom_PWR_OFF_ON	String for Auto Power Off/On. (Micom Reboots byPLL FAIL / COMP FAIL / RESET and so on.)	Micom Power	0x31
ON_BY_NETFLIX	Power on by Netflix hot key	netflx	0x76
ON_BY_OKKO	Power on by Okko hot key	okko	0x9D	NEW
ON_BY_ON_TIMER	Power on by on timer function	onTimer	0x21
ON_BY_OPERATOR_SEARCH_TIMER	Power on at reservation time for CI plus operator search	ciPlusSearchTimer	0x36
ON_BY_OTA	Power on by OTA reservation	ota	0x2C
ON_BY_PNWASHDONE	(OLED) Power on by panel noise wash function complete (Not for webOS 22)	PNWASH Done On	0x3F
ON_BY_PNWASHFAIL	(OLED) Cancel the panel noise wash function by DC on (Not for webOS 22)	PNWASH Fail On	0x70
ON_BY_POWER_ONLY	Power on by p-only remote key or UART command	Power Only	0x25
ON_BY_QUICK_START	Auto on by QSM+ function after Power off by quick start	Quick Start	0x3B
ON_BY_QU1CK_START	When a reboot action is required in a specific scenario (Alter update, config change, broadcasting channel related, etc...)	webOS 22		NEW
ON_BY_RAKUTEN_TV	Power on by Rakuten TV hot key	Rakuten TV	0x9A	NEW
ON_BY_REBOOT_ARREGULAR	Reboot every 6 hours to stabilize the system in Always Ready state	webOS 22		NEW
ON_BY_REBOOT_FAULT	Reboot when dc off after fault occurrence for fault recovery	webOS 22		NEW
ON_BY_REBOOT_ONREGULAR	After using the TV for a long time (standard: 12h, advanced: 24h), when DC off. Wait for 1 minute in warm for system stability and then reboot	webOS 22		NEW
ON_BY_REBOOT_TIMEOUT	Reboot when client timeout occurs when entering suspend or always ready	webOS 22		NEW
ON_BY_REMIND	Power on by remind function	Remnd	0x26
ON_BY_REMOTE_APP	(Rollable OLED) Power on by smart phone application	Register Remote App	0x7E	NEW
ON_BY_REMOTE_KEY	Power on by remote Power Key	Remote Key	0x20
ON_BY_RESERVE	Power on by reserve function	Reserve	0x23
ON_BY_RS232C	Power on by rs-232c command	RS232c	0x24
ON_BY_SHAHID	Power on by SHAHID CP hotkey	webOS 22		NEW
ON_BY_STORE_POWERON	Power on by store-only remote	Store	0x30
ON_BY_SWDOWN	Reboot by s/w download function	SW Download	0x27
ON_BY_TOT	Ph rase let whie performing Power On to perform TOT (Time Of Tabte) operaion v/en time informason is updated	TOT Timer	0x79
ON_BY_UPDOWN_KEY	(Rollable OLED) Power on by up/down key using R9 remote controller	Up Down Key	0x7D	NEW
ON_BY_UTTDOWNLOAD	Power On By UTT Download mote	UTT Download	0x93
ON_BY_VOICE_FULLVIEW	(Rollable OLED) If user wake up from warm to full view with voice recognition, save this reason	Voice Full	0x7C	NEW
ON_BY_VOICE_PARTIALVIEW	(Rollable OLED) If user wake up from warm to partial view with voice recognition, save this reason	Voice Partial	0x7B	NEW
ON_BY_WARM_DPM	For StandbyME Models only, when the TV is turned on with HDMI CLK recognition in "DPM mode On" condition (Standby-> Active Standby)	webOS 22		NEW
ON_BY_WATCHAPLAY	Power on by Watcha play hot key	Watch a play	0x9F	NEW
ON_BY_WEAVE	Power on by iOT device	Weave	0x74
ON_BY_WOBLE	When detect Bluetooth signal, TV will be auto DC on	Wake On Bluetooth	0x73
ON_BY_WOL_ONOFF	Power on by Wake On Lan from external device through network	Wake On Lan	0x37
ON_BY_WOW_ONOFF	Power on by Wake on WiFi	Wake On WiFi	0x39
ON_SVCTEST	Power On By Service test mode	Service Test	0x92
ON_BY_UNEXT	Power on by u-next CP hot key	webOS 6.0		NEW
ON_WOV_START	When TV turn on by voice "Hi LG"	Warm by WOV	0x90
ON_WOV_SUCCESS	When you say TV On after "Hi LC"	Power On by WOV	0x91
UNKNOWN	Power on/off by other reason (abnormal case)		0xFF